instrument-clusters-icp

My cluster is completely dead and not responsive, what's next?

John Wells 7 December 2020

We do rebuild clusters. See a list of clusters that we rebuild.

Go to instrument cluster section
Select Make, Model, Year of your vehicle
You will see all parts that we service for your vehicle

Here are some common FAQs if you received your instrument cluster back after repair and still have issues. Question: My ICP - Instrument cluster is completely dead and not responsive or some functions of the cluster are not working. Will your service be beneficial? Answer: If the vehicle’s battery was not disconnected prior to removal of the cluster, it may blow inadvertently, blow a fuse along the wiring behind the dash, blow a relay near the fuse box, or blow a fuse in one of the multiple fuse boxes in the vehicle. Oftentimes there are communication issues that may prevail if the cluster is installed back in the vehicles. One of the fastest and easiest ways to clear any soft codes in the vehicle is to do a simply battery reset: -Disconnect the battery cables -Clamp the cables together with the terminals touching (off the battery!) -Leave the cables maintained in this position for 15-20 and then re-install *This should clear any soft codes and communication issues with the vehicle’s PCI bus.* You are most likely experiencing a wiring issue. Sometimes pulling on the wires instead of the tabs may sever connection to the cluster check to see if they are not pushed back. Also electrical spray cleaner is recommended for clusters with power issues because corrosion settles on the metal pins. It is wise to spray both the pins and the plug itself and check for any bent pins. Lastly, make sure none of the fuses related to the dash and cluster are blown out.

My cluster is completely dead and not responsive, what's next?

ADDRESS

ABOUT

OUR LINKS

HELP

CUSTOM REPAIR?

SELL YOUR PARTS TO US

JOIN US, BECOME OUR PARTNER

SIGN UP AND SAVE

TOLL FREE

888-979-9343

CUSTOMER SERVICE

MON - FRI 9:00AM - 5:00PM EST

LOBBY HOURS FOR PICK-UP

MON - FRI 9:00AM - 5:00PM EST

My cluster is completely dead and not responsive, what's next?

TCM Replacement Cost | Save Money On Repairs with UpFix

How to repair a failing Instrument Cluster?

Similar Blog Posts

I reinstalled my cluster and it still has erroneous diagnostic lights, what's wrong? Solution: Reset Battery

Battery Troubleshooting Guide for Mileage Correction

I received my ECU and it still has Error Codes. Solution: Reset Battery

ADDRESS

ABOUT

OUR LINKS

HELP

CUSTOM REPAIR?

SELL YOUR PARTS TO US

JOIN US, BECOME OUR PARTNER

SIGN UP AND SAVE

TOLL FREE

888-979-9343

CUSTOMER SERVICE

MON - FRI 9:00AM - 5:00PM EST

LOBBY HOURS FOR PICK-UP

MON - FRI 9:00AM - 5:00PM EST