I reinstalled my cluster and it still has erroneous diagnostic lights, what's wrong? Solution: Reset Battery

This is the Battery Troubleshooting Guide

• If the vehicle’s battery was not disconnected prior to removal of the unit, it may have inadvertently blown a fuse along the wiring behind the dash, a relay near the fuse box, or a fuse in one of the multiple fuse boxes in the vehicle.

• Oftentimes there are communication present if the unit is installed back in the vehicle. One of the fastest and easiest ways to clear any soft codes in the vehicle is to do a simply battery reset:

1. Disconnect the battery cables
2. Clamp the cables together with the terminals touching (off the battery!)
3. Leave the cables maintained in this position for 15-20 seconds and then re-install